Thanks to its cubic design and pure white finish, the OGO is a real design object. The electric mixer no longer needs a crank and the separately removable solids container simplifies emptying. Like all of our separation/composting toilets, the OGO does not require water or chemicals and operates odor-free and environmentally friendly.
Most important features:
New agitator - Electric at the touch of a button
All of our composting toilets mix solids and coconut fiber with an agitator, so there is no need to introduce litter by hand. With the OGO, this agitator is now electrically powered. This makes a crank unnecessary.
Optimized container - Easy emptying
The newly designed solids containerälter of the OGO can be removed very easily. This makes emptying even easier. The urine bottle now holds nine liters and thus over half a liter more than the Nature Head.
Optimized design - elegance in the smallest space
Cubic, minimalist and in white sanitary optics. The OGO is a real design object. With its unbeatably low installation depth, it brings toilet comfort even in small vehicles, campers or boats.
Smart separation flap - Women friendly
As with the Nature Head, the separation mechanism in the seat is designed so that urine and solids are already collected separately when going to the toilet for men and women equally comfortable.
Proven compost process - Environmentally friendly
No water, no chemicals. The urine bottle is simply emptied as needed and odor-free compost is created from the solids, which can be disposed of easily.
Additional info:
Quality: Made of high-quality polypropylene (PE). Ergonomically shaped seat.
Operation and cleaning: After each use, the solids are mixed with coconut fibers. With the OGO, you just press the button for the electric agitator for this, it could not be more uncomplicated. For cleaning, all you need is a spray bottle with vinegar solution or diluted citric acid.
Emptying: empty urine bottle as needed. The solid waste container has a capacity of up to 30 toilet trips. Disposal as residual waste or on home compost (must not be used as fertilizer for edible plants)
Installation:
Supplied with all necessary parts except:
Outdoor fan (cover), as each application requires a different fan. Common are e.g. gill plates in various sizes (if you have e.g. already an old feedthrough), for a new installation a size of about 6 cm diameter is sufficient.
We would recommend a fly screen or a comparable solution with gauze to prevent insects from entering the ventilation hose.
Installation notes:
Vent / Hose: For some installation variants longer hose lengths could be required. We recommend in these fills an extension of the supplied hose by a standard HT pipe DN40. Even if it is not mandatory for the OGO, it is recommended to always install a flexible piece of hose towards the toilet so that it can be pulled off for possible maintenance work. You can use the HT40 pipe as a wall duct. Cut it to the appropriate length (wall bars + 5 cm) and glue it in place. You can now attach the hose to the inside of the vehicle. Alternatively, a flange can be used.
Floor construction: depending on the floor construction, you need appropriate screws (4 pieces). In our toilets are supplied as standard 4 screws for wood.
Power connection: Please be sure to ensure a fuse protection with 10 A and adequate cable cross-sections! If you want to operate the toilet on a 230 volt power supply (house connection), this can be done with the help of a power supply unit. You need a power supply 12 V 10 A with a hollow plug 5.5 mm x 2.5 mm, as they are used, for example, for monitors.
Version differences: version 2022 to version 2023
New timer:
The new timer is now NOT voltage sensitive and does NOT need to be fused against voltages of over 12.8 V. In addition, the new timer now allows the agitator button to start-stop if pressed again while the motor is running. If not, the motor will air as usual for up to 45 seconds, depending on the level of the solids tank.
New wiring harness:
Now allows easier handling for custom builds or spare parts installation.
New agitator linkage:
The new agitator linkage has been completely redesigned and is now CNC machined and much smoother running. As a result, the agitator no longer touches the tank and is much quieter.
Solids flap lever safety clips:
All levers are now protected against slipping with a safety clip. As a result, the solid flap always opens evenly with ease.
Gray, opaque urine bottle:
The contents of the urine bottle are now no longer visible from the outside. This means that emptying the urine container is better protected from unpleasant looks.
Revised fan housing:
The revised fan housing now allows even more air flow and thus better and more reliable drying of the solids container.
