GasCube warns of escaping propane / butane gas (LPG) and gases with stunning effect. GasCube is used to warn people in a motorhome or caravan of the risks of escaping gases. GasCube is permanently installed in the vehicle. The optional additional sensors (cable length 2.7 m) detect the gas concentration in the air just as effectively as the main sensor and bring additional safety in the event of rising and falling gases.

Technical data:

• Central button: ON/OFF
• Connection: fixed connection to 12 V on-board power supply
• Pressure switch: ready for operation after 3 minutes
• Supply voltage: 12 to 30 volts DC
• Acoustic signal: approx. 80 dB
• Current consumption standby mode: 100 mA
• Current consumption alarm: 180 mA
• Current consumption additional sensor: 95 mA
• Sensor: Temperature-guided sensor also above 25 ° C works reliably
• Mounting: about 100 cm Above the ground

Sensitivity:

• Optional wide range sensor for LPG gas (Art.No. 802485)
• Propane/butane (LPG), narcotic gas = approx. 95 PPM
• Optional specific CO (carbon monoxide) gas sensor (Art.-.No. 802484)
• Carbon monoxide (CO) = 90 PPM (40 PPM after a few hours of operation)

There are 3 possible combinations of the additional sensors:

1. 2x sensor for detection of CO gas
2. 2x sensor for detection of LPG gas
3. 1x sensor CO gas + 1x sensor LPG gas