Nautic-Compact air warm water boiler, especially constructed for motor homes, yachts, boats and sales vehicles. Type LE: combi device, especially for motor boats and motor homes. The device will be connected at an air circulation heating and during the heating period the service water will be heated via the installed heating exchange of the device. So the service water will be heated at no costs and reaches approx. the same temperature as the heating air. In position the device also can heat the service water with the installed electric cartridge additionally. There the water will be heated up to approx. 70°C. By complete heating up (as described previously) By adding cold water, the double to triple amount of water can be taken. Nautic-Compact air can be mounted at every cold water supply with hose lines serially or subsequently. The water connection is possible at the submersible pump as well as at the foot or hand operated pump. If connecting a pressure pump at safety valve set has to be mounted. If it will be connected at a water pipe with a higher pressure than 2,0 bar, a pressure reducer must be inserted additionally. The devices are intended for hose connections to counteract vibrations at the maritime and mobile range. Nautic compact L is so constructed, that even at an empty service water tank, the boiler always remains filled and never will be pumped empty. Therefore a complete deflation is only possible if the water outlet valve is open. The boiler and heat exchanger from Nautic-Compact L are produced of the best acid-proof Niro material V4A stainless steel and fully insulated. The robust insulation provides, that warm water is available for a long time. The installation can be done i.e. at the storage room under a seating group or wherever an appropriate space is available. The detailed assembly instruction is enclosed. Technical data: Content 6 litre. Dimensions: l39xw22xh23 cm. Weight approx. 4kg. Installation lying position â?? floor mounting. Operation pressure 0 â?? 3 bar. Voltage/capacity: 230V/500W. Warm-up period approx. 33min (55°C 500W). 1 m cable, connecting cable without plug. Water temperature approx. 70°C pre-set. Material: heating element stainless steel V4A/Incoly, water tank stainless steel V4A, insulation EPP. Water connection Ã? 10mm for hose connection. Manual drain valve for boiler deflation. 5 years factory warranty.