If shore power is applied, the automatic charger starts automatically and, depending on the battery type and capacity, charges the on-board batteries and, if necessary, also the start battery. If the shore power input is weakly fused, the devices can be limited. If high starting currents are required, these are briefly made available from the on-board battery. This task is performed by the integrated sine wave inverter.
It can be subjected to very high loads and is equipped with an automatic power transfer switch. As long as shore power is present, it is switched to the interior sockets. If no external power source is available, the inverter supplies the sockets with power. It also has an integrated load detection to put the inverter into power saving mode when not in use for a longer period of time.
Specifications:
Input voltage: 10.5-15V
Charge current: 0-60A
Continuous power/peak power: 1600W/2500W
Standby power consumption: 0.16A
Power changeover: Series