While solar modules with aluminium frames are placed on retaining spoilers - to guarantee optimum under-ventilation - these solar modules can be glued directly onto the vehicle roof.
When laid flat, the modules can be fully walked on. It is also possible to apply the modules to slightly curved roof surfaces (bending radius 3 cm in longitudinal direction) without any problems.
The high-performance cells used in the FLAT LIGHT solar modules have a very high voltage level and thus guarantee solar output even in southern holiday regions with high ambient temperatures.
The individual solar cells are mounted on a high-strength carrier plate and protected on the surface by a self-cleaning and highly transparent top layer against extreme weather conditions. Due to its low weight, it is also ideally suited for use in panel vans and vehicles in the 3.5 t class, or for high roofs where the installation height must be as low as possible. The weather-resistant connection cable is already firmly attached to the solar module and can be routed universally into the interior at a suitable location using the enclosed roof grommet.