Shunting aid for tandem axles Standard
Simple installation:Bolt both drives to the frame via the cross brace, connect plus-minus cable to the battery, mount magnetic switch on the drawbar - that's it!
Perfect one-hand operation via joystickWith no effort at all and only one hand, you can move the vehicle to the desired position with the hand-held radio transmitter. The joystick reacts sensitively and smoothly to the operator's command. Where the thumb points, the caravan also moves. The joystick willingly follows all movements of your thumb in all directions and at any speed you desire, completely stepless and with a sensitivity that will inspire you.
High performance and safe Immediate stop on slopes: As soon as the joystick is released, the trailer stops at the slope, braked.
Safety first: Activation and automatic switch-off
Operation is only possible if the hand-held radio transmitter is activated at the overrun device. Operation in the car while driving is thus prevented (child safety lock).
Height Chassis >125-184 mm.
Max. Ground clearance: M-chassis without step in front of axle: in front of axle (top mounting) + behind axle (bottom mounting)
Max. permissible gross vehicle weight: 3 t tandem axle
Max. permissible gross vehicle weight: 3 t tandem axle
Max. permissible gross vehicle weight: 3 t tandem axle
Max. permissible gross vehicle weight: 3 t tandem axle
Max. permissible gross vehicle weight: 3 t tandem axle
Max. permissible gross vehicle weight: 3 t tandem axle
Max. permissible gross vehicle weight: 3 t/>Max. permissible gross vehicle weight: 3/>Max. permissible gross vehicle weight: 3/>Max. Gradeability:
For a total weight of 3.00 t: 15
With soft start and soft stop
Paving in the direction of travel in front of the axle and behind the axle is possible.
Additional kits can be found under article no. 920922 (reinforcing plates with screw material), 920923 (spacer plates with screw material), 920924 (special cross strut with Mammut holder).