The Maxivan canopy offers 2 additional comfortable berths in your van. It is always delivered with 3 parts to make the assembly as easy as possible: The roof shell mechanism and tent bellows, the GRP lower frame and the front spoiler.
The GRP subframe is glued to the bodywork and the roof shell is mounted on it. The tent bellows are fastened with classic tent bellows tracks.
The GRP frame requires a mounting surface of 275x145 cm, the front spoiler requires a body length of approx. 45 cm, but can also be mounted or omitted in the area of the front pitch of the roof.
The entire installation takes place above the roof plate, e.g. the hatch opening of a hectic roof is sufficient as a roof cut-out. Roof locking with straps. The bed cushion rests under ventilation directly on the roof plate.

The positioning of the roof is designed in such a way that an existing cut-out of a Heki directly behind the driver's cab can be used as a passageway. The GRP frame then ends exactly in the area of the transverse bead of the roof plate. Roof hatches behind the cross bead can be retained. The positioning results in a roof bed length from the cut-out of 180 cm, which can be extended to 2 m with an additional part if required (optional). Construction height approx. 21 cm.